Sauna Cover Care and Installation

Start with the cover front panel fully unzipped, loose, and unsecured. Place the supplied plastic sheet across the entire roof. Keep the rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. With the canvas front panel unzipped, lower the cover over the roof and sides. Align the cover opening with the sauna entrance. Roll the cover’s canvas front panel upward from the bottom, then secure it with all three slim ties. Keep the zipper tracks beneath their fabric flaps. To close the front, release all three slim ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three slim ties.

Start with the cover front panel fully unzipped, loose, and unsecured. Place the supplied plastic sheet across the entire roof. Keep the rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. With the canvas front panel unzipped, lower the cover over the roof and sides. Align the cover opening with the sauna entrance. Roll the panel horizontally from right to left. Secure the vertical roll with three straps. Keep the zippers beneath their fabric flaps. To close the front, release all three narrow retainers, unroll the panel from left to right, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, then roll it from the handle side on the right toward the left, and secure all three narrow retainers.

Install once. Access your sauna anytime. Unzip the canvas front while the glass sauna door stays closed. Roll the panel upward from the bottom, then secure all three thin natural ties. To close, release the ties, roll the canvas down, and zip the panel.

Compare two front door options. The standard front door rolls upward. The upgraded front door rolls to the side. Access your sauna while the cover stays fitted.

Some products offer a choice of front opening width. Choose the wide front opening for the broadest access across the sauna front. Or enter the actual glass door width. The opening adds two inches on each side. Use this choice only when the product page offers the opening width option.

Start with the cover front panel fully unzipped, loose, and unsecured. Lay the supplied plastic across the roof. Keep rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. Hold the canvas front clear. Lower the cover from the roof and down the sides. Align the side zipper flaps. The glass sauna door stays closed. Roll the loose front canvas panel upward from its bottom edge. Secure the roll with all three thin ties, leaving the glass door clear. To close the front, release all three thin ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three thin ties.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from left to right. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the left. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from left to right. Secure all three retainers. Leave the whole cover fitted.

Start with the cover front panel fully unzipped, loose, and unsecured. Lay the supplied plastic across the roof. Keep rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. Hold the canvas front clear. Lower the cover from the roof and down the sides. Align the side zipper flaps. The glass sauna door stays closed. Roll the loose front canvas panel upward from its bottom edge. Secure the roll with all three thin ties, leaving the glass door clear. To close the front, release all three thin ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three thin ties.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from left to right. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the left. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from left to right. Secure all three retainers. Leave the whole cover fitted.

Start with the cover front panel fully unzipped, loose, and unsecured. Lay the supplied plastic across the roof. Keep rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. Hold the canvas front clear. Lower the cover from the roof and down the sides. Align the side zipper flaps. The glass sauna door stays closed. Roll the loose front canvas panel upward from its bottom edge. Secure the roll with all three thin ties, leaving the glass door clear. To close the front, release all three thin ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three thin ties.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from right to left. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the right. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from right to left. Secure all three retainers. Leave the whole cover fitted.

Start with the cover front panel fully unzipped, loose, and unsecured. Lay the supplied plastic across the roof. Keep rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. Hold the canvas front clear. Lower the cover from the roof and down the sides. Align the side zipper flaps. The glass sauna door stays closed. Roll the loose front canvas panel upward from its bottom edge. Secure the roll with all three thin ties, leaving the glass door clear. To close the front, release all three thin ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three thin ties.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from left to right. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the left. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from left to right. Secure all three retainers. Leave the whole cover fitted.

Start with the cover front panel fully unzipped, loose, and unsecured. Lay the supplied plastic across the roof. Keep rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. Hold the canvas front clear. Lower the cover from the roof and down the sides. Align the side zipper flaps. The glass sauna door stays closed. Roll the loose front canvas panel upward from its bottom edge. Secure the roll with all three thin ties, leaving the glass door clear. To close the front, release all three thin ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three thin ties.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from left to right. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the left. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from left to right. Secure all three retainers. Leave the whole cover fitted.

First, spread the supplied plastic sheet across the entire sauna roof. Smooth it flat before fitting the canvas cover. Keep the rear and side drops within six inches. At the front, trim the plastic to one or two inches, hidden beneath the canvas. Fully unzip the canvas front. Roll the loose door upward from the bottom and secure all three thin ties before lowering the cover. With the canvas door already rolled up, lower the cover over the sauna roof and sides. Keep the glass entrance clear. Align the side zipper flaps. Check that the roll leaves the sauna door and handle clear. To close the cover door, release all three ties and roll the canvas down. Zip the front closed beneath the fabric flaps. To reopen, unzip the front, roll it upward, and secure all three ties. The whole cover stays fitted for everyday sauna access.

First, lay the supplied plastic across the entire roof. Keep the sheet flat. Keep rear and side drops within six inches. At the front, leave one to two inches hidden beneath the canvas. Before fitting the cover, unzip the front. Roll it sideways from left to right. Secure all three narrow retainers. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Check the roof, corners, and zipper flaps. Release the three retainers. Unroll the front sideways to the left. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from left to right. Secure all three retainers. Leave the whole cover fitted.

Roll the front upward, then secure three matching silver thermal ties. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and check the corners. Keep the glass sauna door closed. Your thermal layer is fitted. Use a separate weather cover outdoors. Release all three silver ties. Roll the panel down, then zip both sides beneath the flaps. Unzip both sides. Roll the panel up and secure all three silver ties.

Release the top. Roll left, then secure three silver thermal straps. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and check the corners. Keep the glass sauna door closed. Your thermal layer is fitted. Use a separate weather cover outdoors. Release all three silver straps. Unroll the panel to the right, then zip beneath the flap. Unzip at the right handle. Roll the panel left and secure all three silver straps.

Roll the insulated layers up together. Secure three silver thermal ties. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and check the corners. Keep the glass sauna door closed. Your thermal layer is fitted. Use a separate weather cover outdoors. Release all three silver ties. Roll the panel down, then zip both sides beneath the flaps. Unzip both sides. Roll the panel up and secure all three silver ties.

Release the top. Roll all layers left together, securing three silver thermal straps. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and check the corners. Keep the glass sauna door closed. Your thermal layer is fitted. Use a separate weather cover outdoors. Release all three silver straps. Unroll the panel to the right, then zip beneath the flap. Unzip at the right handle. Roll the panel left and secure all three silver straps.

Roll the front upward, then secure three matching silver thermal ties. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and corners. Keep the glass door closed. Release the three silver ties. Unroll the thermal panel down, then zip it closed before fitting the canvas. Roll up the canvas front separately, securing its three canvas ties. Lower the canvas over the closed thermal cover, keeping the canvas front rolled open. Smooth the canvas sides and check the corners. Both covers are fitted. Release the three canvas ties. Roll the canvas down, then zip it closed. Unzip the canvas. Roll it up and secure all three canvas ties. Now unzip the thermal panel. Roll it up and secure all three silver ties. Both panels are open.

Release the top. Roll left, then secure three silver thermal straps. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and corners. Keep the glass door closed. Release the three silver straps. Unroll the thermal panel to the right, then zip it closed before fitting the canvas. Roll the loose canvas panel left, then secure three canvas straps. Lower the canvas over the closed thermal cover, keeping the canvas front rolled open. Smooth the canvas sides and check the corners. Both covers are fitted. Release the three canvas straps. Unroll the canvas to the right, then zip it closed. Unzip the canvas. Roll it left and secure all three canvas straps. Now unzip the thermal panel. Roll it left and secure all three silver straps. Both panels are open.

Canvas exterior, insulation and reflective lining open together. With standard operation, roll the integrated panel upward. With upgraded operation, roll the same integrated panel from side to side. Three retaining straps secure the roll, leaving the glass door fully clear.

Start with the dust cover front panel fully unzipped, loose, and unsecured. Keep the cover front panel unzipped as you lift the cover above the sauna. Lower the cover from the roof, working it down around the sides. Roll the loose cover front panel upward from the bottom, then secure all three ties. Use the dust cover indoors only. It does not protect against outdoor weather. To close the front, release all three ties, roll the canvas down, and zip it closed. To reopen, unzip the panel, roll it upward from the bottom, and secure all three ties.

Before fitting the cover, unzip the front. Roll it sideways from right to left. Secure all three narrow ties. With the front already rolled to the side, lower the whole cover onto the sauna. Keep the entrance clear. Use this dust cover indoors only. Release the three ties. Unroll the front sideways to the right. Zip it closed beneath its fabric flaps. Unzip the front and roll it sideways from right to left. Secure all three ties. Leave the whole cover fitted.

Place the cover over the barrel and settle the material evenly. Secure the center snaps at the top center of the front and back curved end edges first. Then secure the remaining material and snaps, checking alignment as you go.

Measure your custom sauna cover from the bare sauna. Start with the full outside width, depth, and height. Measure outside width across the widest points of the front. Include any projections, and record the actual width. Measure outside depth from the front face to the rear-most point. Keep the tape straight and record the actual depth. Measure overall height from the supporting surface to the highest roof point. Record the actual outside height. Measure the actual sauna front door width. Record it for cover-opening selection. For a corner model, measure every side width and the overall height. Measure D from the rear-right corner to the midpoint of the angled front. For peaked roofs, use the separate roof guide. Before ordering, check width, depth, height, and actual door width against the values you recorded. Measure twice before ordering.

First, choose the drawing that matches your actual roof: gable, single slope, or hip. Measure the real sauna, including its roof outline. For a gable roof, trace the ridge and each sloping roof face. Include the roof overhang shown on your selected drawing. Measure the roof at its outermost edges, then the widest outside sauna span. Record each requested length separately on the gable drawing. Record the eave height, the rise from eave to peak, and the overall height to the peak. Follow every remaining arrow on the sheet. For a single-slope roof, the high edge is above the front glass door, and the low edge is at the rear. Measure the full roof depth and width, including overhang. Measure the high front height by the glass door, then the low rear height. Mark the front and rear clearly on your drawing. For a hip roof, start with the widest exterior width and depth. The selected sheet also asks for wall and opening measurements. On the top view, record overall roof width and depth, then measure each line from peak to corner and peak to edge. Follow every ray shown. Complete every measurement field on your selected drawing in inches. Do not substitute an estimate for an unmeasured line. Add the requested front-facing sauna photo.

Measure the bench surface where the cushion will sit. Clear the surface so both edges are visible. Measure the usable bench width from the left edge to the right edge. Keep the tape straight. Measure the usable seating depth from the front edge to the back edge. If you selected a second cushion size, repeat width and depth on that bench. Record each pair separately. Enter the matching width and depth in inches. Check each value against the correct bench before ordering.

Start with a canvas cover for outdoor weather protection. Thermal covers go underneath. Choose insulated thermal for extra insulation. The bundle has two separate covers, with separate front doors. All-in-One combines three layers in one cover. Choose a dust cover for indoor use only. Roof-only covers the top. The sides stay uncovered.

Roof-only coverage protects the top of your sauna. The sides stay uncovered. This is not a full sauna cover. Match your roof shape, and follow the measurement guide. Check every dimension before ordering.

Made for your sauna starts with the dimensions you provide. Illustrative sample: seventy-two inches wide, sixty deep, and seventy-eight high, with a fifty-six by seventy-four inch door opening. The matching form carries the same dimensions, roof profile, and door position. The fitted cover follows the roof and sides, while the canvas opening aligns with the sauna door. Measure, match, and review your custom configuration.

Choose the roof shape and the model size that match your sauna. Enter whole or quarter inches, such as forty point two five. Complete every required option, including the door style and colors. Review your selected options and total before adding to cart.

Review measurements, roof shape, opening, colors, and options before ordering. Custom covers are made to order. Production time is shown on the product page, and rush production is available. When your cover ships, it travels from Southern California. Standard Ground transit to the Lower 48 is three to seven days after shipping.

The right attachment choice starts with the snap option shown for your order. The product page shows the snap choice. This sample explains the attachment points. At the front, the snap attaches beside the opening, never to the door. Side and rear attachment points secure fixed cover fabric to the sauna base. This close-up shows the metal attachment used on the fixed cover fabric. Use the option shown on the product page; this is guidance, not a wind guarantee.