At a glance
- Sauna cover plus a separate thermal cover
- Choose custom dimensions or your sauna company
- Door, color, valance and wind snap options
YOUR COVER, TOGETHER
See your finished cover
Bring your choices together with photographic fabric and wood detail. Preview the front open, front closed and rear.
The exterior shown is the one-piece outer cover. The thermal cover remains inside and is not shown as an extra exterior shell.
Choose your roof shape and standard-door opening width to see your cover. Loading your cover preview… The preview images could not load. Close this preview and try again. Your appearance selections are ready to preview. You can still change any choice above. To preview your cover, choose: The selected fabric color is unavailable in the illustration. Please refer to its swatch. Standard door: three natural-colored ties hold the roll open. Tie color stays natural with every cover color. Upgraded door: shown rolled to the side. It can open from either side and can be fully removed. Rear-panel weather slot: LEFT when facing the front of the sauna. It appears on your right in this rear view. Rear-panel weather slot: RIGHT when facing the front of the sauna. It appears on your left in this rear view. No rear power-cord weather slot selected. The cover proportions use your entered dimensions. Roof and door details are an approximate visual guide. Standard: 2–3 snaps depending on the model. Markers illustrate fastening; final positions vary. Two snaps on each side: eight total around the cover. The two front snaps sit on the fixed fabric beside the door. Placement is approximate. Snaps every 18 inches. Markers show approximate spacing; the total and end positions depend on the final fit. Custom sauna cover with photographic material detail Front · door open Rear view Front · cover closed Standard door shown closed. Inward-facing fabric flaps cover both zippers to shield them from sunlight. When rolled open, the door is held with three natural-colored ties. Upgraded door shown closed. Inward-facing fabric flaps cover both zippers to shield them from sunlight. The door can roll to either side or be fully removed. Corner model selected. Colors and options are illustrated on a rectangular sample; the exact corner shape is not modeled.Your roof measurements
Choose the drawing that most closely matches your roof. Measure the widest points of the sauna in inches, following every red arrow. Use 0 only for a window or front section that is not present.
Enter inches, for example 24, 24.5 or 24 1/2.
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
G11
G12
G13
S1
S2
S3
S4
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
Complete the measurements, then attach your sheet.
Download completed sheetPlease also attach a front-facing photo of your sauna in the photo upload below.
View the original measurement sheetStandard front-door opening
Measure the actual front door width. We will add 2 inches on the left and 2 inches on the right — 4 inches total.
Shows more of the sauna front and any front windows, with more visibility out. The wider roll can be harder for one person to open and close.
A smaller roll is easier for one person to open and close. Fabric covers the front sections beside the door.
AI visual example. Both options keep the standard door ties in natural ivory. Your cover follows your supplied measurements.
Wind-snap placement
Each small snap screws into the sauna’s wood. On the front, snaps fasten only to the fixed cover fabric beside the opening—never to the door.
See the supplied snap hardware
Sauna Cover & Thermal Cover
Your price
Size and selected options determine your final price.
Standard cover production: 14–16 weeks before shipping.
Build your order
Select each applicable option below. Review your measurements and choices before adding to cart.
Full specifications & detailsView custom colorsMaterials, measurements, care & specifications
Back to your options ↑🔥 MAXIMUM PROTECTION + MAXIMUM PERFORMANCE (BUNDLE & SAVE $100)
Get both the Outdoor Sauna Cover + Thermal Cover together
This is the complete system for your sauna:
- Outer cover protects from weather
- Inner thermal layer traps heat
👉 One protects. One performs. Together, they do both.
💰 Save $100 automatically when purchased together
🧊 WHEN YOU ACTUALLY NEED THIS
If you use your sauna in colder conditions:
- Below ~20°F → Strongly recommended
- Winter climates → Major performance upgrade
Without a thermal layer:
- Heat escapes faster
- Warm-up takes longer
- Energy usage increases
This solves all of that.
🛡️ HOW THE SYSTEM WORKS
OUTER COVER (WEATHER PROTECTION)
- Blocks rain, snow, and UV
- Prevents moisture damage
- Extends sauna lifespan
INNER THERMAL COVER
- Traps heat inside
- Reduces warm-up time
- Improves energy efficiency
- Reflective interior boosts performance
👉 You need BOTH for full protection + efficiency
⚠️ IMPORTANT (THERMAL COVER LIMITATION)
- Thermal cover is NOT weatherproof on its own
- Must be used under the standard sauna cover
- Comes in silver only (hidden underneath)
- 1-year craftsmanship warranty for manufacturing defects in construction only
🎨 FULLY CUSTOMIZE YOUR OUTER COVER
- Choose your roof color
- Choose your side material color
The thermal layer stays hidden underneath.
🌊 VALANCE OPTION
- Standard: Straight valance
- Upgrade: Wavy valance
Adds both style + extra moisture protection
🚪 DOOR OPTIONS (APPLIES TO BOTH COVERS)
⚠️ If selecting side door options, both covers must match door style
Standard Door (Included):
- Vertical roll-up
- Secured with 3 ties
Upgraded Door (Recommended):
- Rolls to the side (horizontal)
- Dual zipper system (detaches like a jacket)
- Can open from either side
- Can be fully removed
- Reinforced ties for secure hold
👉 Easier access. Better usability.
🌬️ WIND SNAP OPTIONS (OUTER COVER)
If your sauna sees wind, this matters.
Over 15 MPH Wind:
👉 Recommend 2 snaps per side (8 total)
Over 25 MPH Wind:
👉 Recommend snaps every ~18 inches
More snaps = stronger hold = longer lifespan
🔌 WEATHER SLOT OPTION
Only needed if your power cord exits from the TOP of your sauna.
- Routes cord through upper rear panel
- Choose left or right side
👉 Not needed for standard lower outlets
💪 HEAVY-DUTY MARINE-GRADE BUILD (OUTER COVER)
- Waterproof Roof Fabric
- Sauleda Marine Canvas Sidewalls
- Heavy Duty #10 Marine Zippers
- UV-Resistant Polyester Thread
- Marine-Grade Snaps + Hardware
🧊 THERMAL COVER BUILD
- Multi-layer construction
- Reflective interior (heat retention)
- Material: Thermal Layer Vinyl
Designed for performance, not exposure.
🔧 WHAT’S INCLUDED
Sauna Cover
✔ Full custom outer cover
✔ Door system
✔ Valance
✔ Snap system
✔ Installation hardware
✔ Plastic moisture barrier sheet
✔ Cleaning + care instructions
✔ Warranty documentation
Thermal Cover
✔ Full inner cover
✔ Door system
✔ Installation instructions
✔ Care instructions
⚙️ FUNCTIONAL DESIGN
- Install both covers once
- Use your sauna normally
- Built for real outdoor + cold-weather use
📏 MEASUREMENT DISCLAIMER
Measure carefully before ordering.
Both covers are built within a ± 1/4” tolerance.
👉 Measure twice. Order once.
🚚 PRODUCTION & SHIPPING
- Made to order
- Production time varies based on demand
- Delivery time depends on location
🧼 CARE INSTRUCTIONS
- Do NOT machine wash
- Clean with mild soap + water only
- Hang dry
🔥 FINAL TAKE
If you want:
✔ Weather protection → get a cover
✔ Better performance → add thermal
If you want both…
👉 This bundle is the complete solution
📩 QUESTIONS?
Not sure which setup is right?
Reach out — we typically respond within 24 hours.
Warranty questions? Use our contact form
Ask for care instructions for your cover material
The thermal material itself is not covered by a warranty.
Once fitted, both covers stay in place—open and close their separate front doors to access your sauna without removing either cover.
Product videos
Sauna Cover & Thermal Cover · Standard front door
Read video instructions
Roll the front upward, then secure three matching silver thermal ties. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and corners. Keep the glass door closed. Release the three silver ties. Unroll the thermal panel down, then zip it closed before fitting the canvas. Roll up the canvas front separately, securing its three canvas ties. Lower the canvas over the closed thermal cover, keeping the canvas front rolled open. Smooth the canvas sides and check the corners. Both covers are fitted. Release the three canvas ties. Roll the canvas down, then zip it closed. Unzip the canvas. Roll it up and secure all three canvas ties. Now unzip the thermal panel. Roll it up and secure all three silver ties. Both panels are open.
Sauna Cover & Thermal Cover · Upgraded front door
Read video instructions
Release the top. Roll left, then secure three silver thermal straps. Now lower the whole cover over the roof. Ease it down evenly, keeping the rolled front clear. Smooth the sides and corners. Keep the glass door closed. Release the three silver straps. Unroll the thermal panel to the right, then zip it closed before fitting the canvas. Roll the loose canvas panel left, then secure three canvas straps. Lower the canvas over the closed thermal cover, keeping the canvas front rolled open. Smooth the canvas sides and check the corners. Both covers are fitted. Release the three canvas straps. Unroll the canvas to the right, then zip it closed. Unzip the canvas. Roll it left and secure all three canvas straps. Now unzip the thermal panel. Roll it left and secure all three silver straps. Both panels are open.
Which cover is right for you?
Read video instructions
Start with a canvas cover for outdoor weather protection. Thermal covers go underneath. Choose insulated thermal for extra insulation. The bundle has two separate covers, with separate front doors. All-in-One combines three layers in one cover. Choose a dust cover for indoor use only. Roof-only covers the top. The sides stay uncovered.
Choose your front opening width
Read video instructions
Some products offer a choice of front opening width. Choose the wide front opening for the broadest access across the sauna front. Or enter the actual glass door width. The opening adds two inches on each side. Use this choice only when the product page offers the opening width option.
Need help choosing?
Contact us before ordering if you have questions about fit or options.
