Skip to content

Custom Sauna Cover

Your price

  • $950.00

Size and selected options determine your final price.

Standard cover production: 14–16 weeks before shipping.

Build your order

Select each applicable option below. Review your measurements and choices before adding to cart.

Full specifications & details

Your selected options

Base price $950.00 USD

Your selections will appear here as you build your order.

Current configured price $950.00 USD

Option charges appear with the selected choices. Shipping and tax are calculated at checkout.


Materials, measurements, care & specifications

Back to your options ↑

🛡️ PROTECT YOUR SAUNA — BUILT TO LAST

Custom-fit, waterproof sauna cover made with premium marine-grade materials — built in the USA

Your sauna isn’t cheap.

Sun, rain, snow, and moisture will slowly break it down over time.

👉 This cover is built to stop that — for years, not months.


🇺🇸 BUILT IN THE USA — NOT MASS PRODUCED

  • Made in the USA
  • Built to order — not pulled off a shelf
  • Crafted with attention to detail at every step

👉 No shortcuts. No mass production compromises.


⚙️ CUSTOM BUILT FOR YOUR EXACT SAUNA

  • Made to your specific dimensions
  • Clean fit — no sagging, no loose areas
  • Built within a ± 1/4” tolerance

👉 No guessing. No generic sizing.


🌧️ ALL-WEATHER PROTECTION

Designed to handle:

  • Rain
  • Snow
  • Sun / UV exposure
  • Moisture buildup

👉 Keeps your sauna protected year-round


💪 BUILT WITH TRUE MARINE-GRADE MATERIALS

This is not cheap fabric.

  • Waterproof Roof Fabric
  • Sauleda Marine Canvas Sides
  • UV-resistant marine-grade thread
  • Heavy-duty #10 marine zippers

👉 The same level of materials used in harsh marine environments


🧵 WHY OUR COVERS LAST LONGER

Most covers fail because of:

  • Weak stitching
  • Low-grade fabric
  • Poor fit (which causes stress points)

Ours are different:

  • Reinforced seams
  • Precision fit reduces wear
  • Heavy-duty hardware throughout
  • Built for long-term outdoor exposure

👉 Designed to last years — not seasons


🎨 FULLY CUSTOMIZABLE LOOK

  • Choose your roof color
  • Choose your side panel color
  • Match your home, patio, or sauna aesthetic

🚪 DOOR OPTIONS

Standard Door (Included):

  • Vertical roll-up
  • Secured with 3 ties

Upgraded Door (Highly Recommended):

  • Rolls to the side (horizontal)
  • Velcro-secured under valance
  • Dual zipper system (opens like a jacket)
  • Can open from either side
  • Can be fully removed

👉 Easier access. Better usability.


🌬️ WIND OPTIONS (IMPORTANT)

Standard: Minimal snaps (varies by model)

Recommended Upgrades:

  • 15+ mph wind:
    → Add 2 snaps per side (8 total)
  • 25+ mph wind:
    → Upgrade to snaps every 18 inches

👉 More snaps = better hold in wind


🔌 WEATHER SLOT OPTION

Only needed if:

  • Your power cord exits from the top of the sauna

Allows routing through:

  • Rear top panel (not the roof)
  • Left or right side (when facing front)

👉 Skip this if your power runs from below


🌊 VALANCE OPTIONS

  • Standard: Straight edge
  • Upgraded: Wavy valance
  • Upgraded: Three-sided valance

📦 WHAT’S INCLUDED

✔ Full custom sauna cover
✔ Front door system
✔ Valance
✔ Tie-down system
✔ Snap system
✔ Marine-grade stitching throughout

✔ Slip Cover System:

  • .004 plastic moisture barrier (roof layer)
  • Snap hardware
  • Instructions + care guide

⚙️ INSTALL ONCE — USE DAILY

  • Install the cover once
  • Continue using your sauna normally
  • No removal required for everyday use

🧼 CARE INSTRUCTIONS

  • Do NOT machine wash
  • Clean with mild soap only
  • Hang dry

📏 MEASUREMENT DISCLAIMER

Measure carefully before ordering.

Each cover is built within a ± 1/4” tolerance.

👉 Measure twice. Order once.


🚚 PRODUCTION & SHIPPING

  • Made to order
  • Lead times vary based on demand
  • Delivery time depends on location

🛠️ WARRANTY

  • 10-year limited warranty covering manufacturing defects; normal wear, misuse, and improper maintenance are excluded.

🔥 COMPLETE YOUR SETUP (OPTIONAL UPGRADES)

Many customers choose to pair their cover with:

  • Thermal Covers → improve heat retention in colder climates
  • Cushions & Pillows → add comfort for longer sessions
  • Floor Mats → protect interior flooring and improve footing

👉 Not required — but noticeable upgrades in performance and comfort


🔥 FINAL TAKE

If you want:
✔ To protect your sauna investment
✔ A cover that actually lasts
✔ A true custom fit (not generic)
✔ USA-made quality with real materials

👉 This is the cover built for it


📩 QUESTIONS?

Not sure about sizing, options, or what you need?
Reach out — we typically respond within 24 hours.

 

          ROOF PEAK DIMENSIONS SHEET
                                 



 

 

Warranty questions? Use our contact form                         

Ask for care instructions for your cover material
                         

Product videos

Why choose our covers?

Read video instructions

Your sauna deserves a cover built around its measurements and how you use it. These Amazon examples come in fixed sizes. We build your cover around your sauna. Flat, sloped, peaked, or corner: your measurements guide the shape of your custom cover. Choose a wider front view, or a smaller door-width opening that is easier to roll. Choose standard vertical roll-up access, or upgrade to a horizontal, removable front door. Install your cover once. Open and close its canvas front to use your sauna. We pair a waterproof Aqualon roof with Sauleda marine-canvas sides. Three slim ties hold the standard door open. Fabric flaps cover the marine zippers. Choose your roof and side colors separately to suit your sauna and your space. Add the valance style, covered cord opening, and wind-snap configuration your setup needs. Other custom sellers offer fabric and fastening choices. We bring your fit and everyday access together. Your cover is made to order in the USA. Backed by our ten-year limited manufacturing-defect warranty. Normal wear, misuse, and improper care are excluded. In our experience, repeat customers typically reorder after ten to twenty years. Individual lifespan varies. Build your custom cover at Sauna Covers dot com. Need help measuring? Watch our measuring video.

A closer look at the construction

Read video instructions

Look closely at the parts that make a custom cover practical outdoors. The roof uses a dedicated waterproof Aqualon roof surface. The side panels use Sauleda marine canvas. Roof and side colors are selected separately. Sewn edges and the valance finish the cover profile and its selected look. The zipper system sits beneath fabric flaps at the front closure. Choose standard roll-up access, or the upgraded side-opening option.

Made for your sauna

Read video instructions

Made for your sauna starts with the dimensions you provide. Illustrative sample: seventy-two inches wide, sixty deep, and seventy-eight high, with a fifty-six by seventy-four inch door opening. The matching form carries the same dimensions, roof profile, and door position. The fitted cover follows the roof and sides, while the canvas opening aligns with the sauna door. Measure, match, and review your custom configuration.

Install once. Access your sauna anytime.

Read video instructions

Install once. Access your sauna anytime. Unzip the canvas front while the glass sauna door stays closed. Roll the panel upward from the bottom, then secure all three thin natural ties. To close, release the ties, roll the canvas down, and zip the panel.

Understanding wind snaps

Read video instructions

The right attachment choice starts with the snap option shown for your order. The product page shows the snap choice. This sample explains the attachment points. At the front, the snap attaches beside the opening, never to the door. Side and rear attachment points secure fixed cover fabric to the sauna base. This close-up shows the metal attachment used on the fixed cover fabric. Use the option shown on the product page; this is guidance, not a wind guarantee.

What happens after you order?

Read video instructions

Review measurements, roof shape, opening, colors, and options before ordering. Custom covers are made to order. Production time is shown on the product page, and rush production is available. When your cover ships, it travels from Southern California. Standard Ground transit to the Lower 48 is three to seven days after shipping.

How to install your cover · Standard front door

Read video instructions

Start with the cover front panel fully unzipped, loose, and unsecured. Place the supplied plastic sheet across the entire roof. Keep the rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. With the canvas front panel unzipped, lower the cover over the roof and sides. Align the cover opening with the sauna entrance. Roll the cover’s canvas front panel upward from the bottom, then secure it with all three slim ties. Keep the zipper tracks beneath their fabric flaps. To close the front, release all three slim ties, roll the canvas down, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, roll it upward from the bottom, and secure all three slim ties.

How to measure your sauna

Read video instructions

Measure your custom sauna cover from the bare sauna. Start with the full outside width, depth, and height. Measure outside width across the widest points of the front. Include any projections, and record the actual width. Measure outside depth from the front face to the rear-most point. Keep the tape straight and record the actual depth. Measure overall height from the supporting surface to the highest roof point. Record the actual outside height. Measure the actual sauna front door width. Record it for cover-opening selection. For a corner model, measure every side width and the overall height. Measure D from the rear-right corner to the midpoint of the angled front. For peaked roofs, use the separate roof guide. Before ordering, check width, depth, height, and actual door width against the values you recorded. Measure twice before ordering.

Custom Sauna Cover · Upgraded front door

Read video instructions

Start with the cover front panel fully unzipped, loose, and unsecured. Place the supplied plastic sheet across the entire roof. Keep the rear and side drops no more than six inches. At the front, retain one to two inches, hidden beneath the canvas. With the canvas front panel unzipped, lower the cover over the roof and sides. Align the cover opening with the sauna entrance. Roll the panel horizontally from right to left. Secure the vertical roll with three straps. Keep the zippers beneath their fabric flaps. To close the front, release all three narrow retainers, unroll the panel from left to right, and zip it closed beneath the fabric flaps. To reopen, unzip the panel, then roll it from the handle side on the right toward the left, and secure all three narrow retainers.

Peaked & sloped roof · Measuring

Read video instructions

First, choose the drawing that matches your actual roof: gable, single slope, or hip. Measure the real sauna, including its roof outline. For a gable roof, trace the ridge and each sloping roof face. Include the roof overhang shown on your selected drawing. Measure the roof at its outermost edges, then the widest outside sauna span. Record each requested length separately on the gable drawing. Record the eave height, the rise from eave to peak, and the overall height to the peak. Follow every remaining arrow on the sheet. For a single-slope roof, the high edge is above the front glass door, and the low edge is at the rear. Measure the full roof depth and width, including overhang. Measure the high front height by the glass door, then the low rear height. Mark the front and rear clearly on your drawing. For a hip roof, start with the widest exterior width and depth. The selected sheet also asks for wall and opening measurements. On the top view, record overall roof width and depth, then measure each line from peak to corner and peak to edge. Follow every ray shown. Complete every measurement field on your selected drawing in inches. Do not substitute an estimate for an unmeasured line. Add the requested front-facing sauna photo.

Standard vs Upgraded front door

Read video instructions

Compare two front door options. The standard front door rolls upward. The upgraded front door rolls to the side. Access your sauna while the cover stays fitted.

Which cover is right for you?

Read video instructions

Start with a canvas cover for outdoor weather protection. Thermal covers go underneath. Choose insulated thermal for extra insulation. The bundle has two separate covers, with separate front doors. All-in-One combines three layers in one cover. Choose a dust cover for indoor use only. Roof-only covers the top. The sides stay uncovered.

Build and review your order

Read video instructions

Choose the roof shape and the model size that match your sauna. Enter whole or quarter inches, such as forty point two five. Complete every required option, including the door style and colors. Review your selected options and total before adding to cart.

Need help choosing?

Contact us before ordering if you have questions about fit or options.

Questions? Contact us