At a glance
Choose the drawing that most closely matches your roof. Measure the widest points of the sauna in inches, following every red arrow. Use 0 only for a window or front section that is not present.
Enter inches, for example 24, 24.5 or 24 1/2.
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
G11
G12
G13
S1
S2
S3
S4
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
H12
H13
H14
H15
H16
H17
H18
Complete the measurements, then attach your sheet.
Download completed sheetPlease also attach a front-facing photo of your sauna in the photo upload below.
View the original measurement sheetMeasure the actual front door width. We will add 2 inches on the left and 2 inches on the right — 4 inches total.
Shows more of the sauna front and any front windows, with more visibility out. The wider roll can be harder for one person to open and close.
A smaller roll is easier for one person to open and close. Fabric covers the front sections beside the door.
AI visual example. Both options keep the standard door ties in natural ivory. Your cover follows your supplied measurements.
Each small snap screws into the sauna’s wood. On the front, snaps fasten only to the fixed cover fabric beside the opening—never to the door.
Your price
Size and selected options determine your final price.
Standard cover production: 14–16 weeks before shipping.
Select each applicable option below. Review your measurements and choices before adding to cart.
Full specifications & detailsView custom colorsCustom-fit, marine-grade cover designed for long-term outdoor protection
Your sauna sits outside.
Most covers aren’t built for that.
They fade.
They crack.
They trap moisture and speed up damage.
This one is built differently.
A SaunaCovers.com cover is designed to:
👉 Built to fit. Built to last.
Every cover is made specifically for your sauna.
✔ Tight, clean fit
✔ No loose material
✔ No water pooling
✔ No weak points
Built to match your setup — not stand out for the wrong reasons.
Adds both style + extra moisture protection
Standard Door (Included):
Upgraded Door (Recommended):
👉 Easier access. More flexibility.
If your sauna sees wind, this matters.
Over 15 MPH Wind:
👉 Recommend 2 snaps per side (8 total)
Over 25 MPH Wind:
👉 Recommend snaps every ~18 inches
More snaps = stronger hold = longer lifespan
Only needed if your power cord exits from the TOP of your sauna.
👉 If your outlet is lower on the wall, you do NOT need this.
This isn’t a tarp — it’s a true protection system:
Most covers:
This one:
✔ Full custom sauna cover
✔ Door system (based on your selection)
✔ Valance (based on your selection)
✔ Pre-installed snap system
✔ Installation hardware (extra screw included)
✔ Plastic moisture barrier sheet
✔ Cleaning + care instructions
✔ Warranty documentation
Install once. Use your sauna normally.
Measure carefully before ordering.
Each cover is built within a ± 1/4” tolerance.
👉 Measure twice. Order once.
If your sauna is outside, this isn’t optional.
It’s what protects your investment from:
👉 Protect it the right way — the first time.
Not sure what options to choose?
Reach out — we typically respond within 24 hours.
Unzip the cover front panel before fitting. Lay the plastic across the roof. Keep it short at the front. Hold the canvas front clear. Lower the cover down the sides. Align the side zipper flaps. The glass door stays closed. Roll the canvas panel upward from its bottom edge. Secure the roll with three ties. Leave the glass door clear.
Contact us before ordering if you have questions about fit or options.
